chore(release): 0.1.1

Signed-off-by: kjuulh <contact@kjuulh.io>

CHANGELOG.md

@@ -0,0 +1,37 @@
+# Changelog
+All notable changes to this project will be documented in this file.
+
+The format is based on [Keep a Changelog](https://keepachangelog.com/en/1.0.0/),
+and this project adheres to [Semantic Versioning](https://semver.org/spec/v2.0.0.html).
+
+## [Unreleased]
+
+## [0.1.1] - 2023-08-08
+
+### Docs
+- *(README)* add motivation why this project should exist
+
+### Other
+- *(cuddle-please)* update
+
+## [0.1.0] - 2023-08-08
+
+### Added
+- add basic ci
+- add basic readme
+- with main loop
+- with initial cmd and server
+
+### Docs
+- *(README)* added some more milestones and fixed docker-compose
+- add clarification about expectations and what milestones are missing
+- add license
+- clarification
+
+### Other
+- Merge pull request 'Configure Renovate' (#1) from renovate/configure into main
+
+Reviewed-on: https://git.front.kjuulh.io/kjuulh/contractor/pulls/1
+
+- Add renovate.json
+

README.md

@@ -1,21 +1,64 @@
 # Contractor - A renovate bot for gitea and github
 
-Contractor is a chatops like bot, integrating with github/gitea issues, allowing commands to trigger renovate runs.
+Contractor is a chatops like bot, integrating with github/gitea issues, allowing
+commands to trigger renovate runs.
 
 ```bash
-/contractor refresh	
+/contractor refresh
 ```
 
-Contractor runs in a regular docker image and uses the official renovate slim image behind the scenes, this can be changed in the configuration.
+Contractor runs in a regular docker image and uses the official renovate slim
+image behind the scenes, this can be changed in the configuration.
 
 ![command](./assets/command.png)
-<small>Do note that the contractor was run under a personal user, hence the same user replied</small>
+<small>Do note that the contractor was run under a personal user, hence the same
+user replied</small>
+
+## Motivation
+
+Renovate by default if hosted yourself, is neither sharded, or runs on a
+cron-job cycle. This leaves a lot to be desired from a developers point of view.
+As it may take quite a long time for renovate to revisit the pull-request again,
+if there is a lot of repositories enabled.
+
+This project intends to add an ad-hoc invocation of renovate for a single
+repository, this enables developers to retrigger renovate whenever they want.
+
+The project is built to be integrated with github and gitea (initially), and
+work in its pull-request system, so when a renovate pr shows up, you can either
+manually retrigger it, or enable any of the options in the renovate dashboard,
+and retrigger.
+
+## DISCLAIMER
+
+The project is still 0.x.x As such the api is subject to change, and the
+examples will probably be out of date. The below should be seen as an example of
+what the project will look like once feature-complete.
+
+## Milestones
+
+- [x] 0.1.0
+  - Includes basic setup such as working server bot, and installation command,
+    automation is missing however. Also only gitea support for now, because this
+    is where the project initially is supposed to be in use.
+- [ ] 0.2.0
+  - Add GitHub support
+- [ ] 0.3.0
+  - Add Delegation support (not clustering, just delegation of renovate jobs)
+- [ ] 0.4.0
+  - Slack integration
+- [ ] 0.5.0
+  - GitHub App and such support
+- [ ] 0.6.0
+  - Add api key support
 
 ## Getting started
 
-First you need to pull and run the contractor image, docker is the preferred way of execution, but golang is also available from source.
+First you need to pull and run the contractor image, docker is the preferred way
+of execution, but golang is also available from source.
 
-Docker compose is given as an example, but you're free to run using `docker run` if you prefer.
+Docker compose is given as an example, but you're free to run using `docker run`
+if you prefer.
 
 See example for a ready-to-run image
 
@@ -24,18 +67,17 @@ See example for a ready-to-run image
 version: "3"
 services:
   contractor:
-	  image: docker.io/kjuulh/contractor:latest
-		restart: unless-stopped
-		commands:
-		- contractor server serve
-		volumes:
-	  - "./templates/contractor:/mnt/config"
-		- "/var/run/docker.sock:/var/run/docker.sock"
-		env_file:
-	  - .env
+  image: docker.io/kjuulh/contractor:latest
+  restart: unless-stopped
+  commands:
+  - contractor server serve
+  volumes:
+  - "./templates/contractor:/mnt/config"
+  - "/var/run/docker.sock:/var/run/docker.sock"
+  env_file:
+  - .env
 ```
 
-
 ```bash
 # file: .env
 GITEA_RENOVATE_TOKEN=<gitea application token> # needs repo and pull request permissions
@@ -57,28 +99,37 @@ CONTRACTOR_API_KEY='<some sufficiently secret password used for webhooks to auth
 // Remember to fill out the options as you see fit, this is not a complete example
 ```
 
-Use renovate secret for each `{{ secrets.HARBOR_SERVER_PASSWORD }}` in your config, replace `HARBOR_SERVER_PASSWORD` with your own
+Use renovate secret for each `{{ secrets.HARBOR_SERVER_PASSWORD }}` in your
+config, replace `HARBOR_SERVER_PASSWORD` with your own
 
 And then run the server with: `docker compose up`
 
-This has started the server, but github doesn't know that it needs to talk to you yet.
+This has started the server, but github doesn't know that it needs to talk to
+you yet.
 
-As such host the server somewhere with a public hostname, such that github or gitea webhooks can reach it, i.e. contractor.some-domain.com:9111
+As such host the server somewhere with a public hostname, such that github or
+gitea webhooks can reach it, i.e. contractor.some-domain.com:9111
 
-To install the webhook, either use the docker image, or download the cli from source.
+To install the webhook, either use the docker image, or download the cli from
+source.
 
 ### CLI
 
 To install the cli
 
 ```bash
-go install git.front.kjuulh.io/kjuulh/contractor@latest	
+go install git.front.kjuulh.io/kjuulh/contractor@latest
 ```
 
-contractor will automatically read any .env file, so you can leave out the secrets.
+contractor will automatically read any .env file, so you can leave out the
+secrets.
 
 ```bash
-contractor install --owner kjuulh --repository contractor --url https://git.front.kjuulh.io/api/v1 --backend gitea	
+contractor install  \
+--owner kjuulh \
+--repository contractor \
+--url https://git.front.kjuulh.io/api/v1 \
+--backend gitea
 ```
 
 If you leave any of these out, contractor will prompt your for required values.
@@ -88,9 +139,15 @@ If you leave any of these out, contractor will prompt your for required values.
 You can also use docker for it.
 
 ```bash
-docker compose run contractor install --owner kjuulh --repository contractor --url https://git.front.kjuulh.io/api/v1 --backend gitea	
+docker compose run contractor \
+install \
+--owner kjuulh \
+--repository contractor \
+--url https://git.front.kjuulh.io/api/v1 \
+--backend gitea
 ```
 
 ### GitHub App
 
-TBD, this should automatically install the webhook for allowed repositories, I just haven't gotten around to it yet. It is on the 0.3.0 Roadmap.
+TBD, this should automatically install the webhook for allowed repositories, I
+just haven't gotten around to it yet. It is on the 0.3.0 Roadmap.

ci/src/main.rs

@@ -195,7 +195,7 @@ mod please_release {
     ) -> eyre::Result<()> {
         let build_image = client
             .container()
-            .from("kasperhermansen/cuddle-please:main-1691463075");
+            .from("kasperhermansen/cuddle-please:main-1691504183");
 
         let src = client
             .git_opts(

renovate.json

@@ -0,0 +1,3 @@
+{
+  "$schema": "https://docs.renovatebot.com/renovate-schema.json"
+}